Settings

The Settings Ribbon contains options on how runs load and appear in trends.

On/Off Indicator: Shows whether the trend is currently in run mode.

Stop Button: Click this button to exit run mode.

Load Runs in Grid and Trend: Generates runs using user-defined criteria and loads them in the Runs Grid and the Trend.

Send Runs to Grid: Generates runs using user-defined criteria and loads individual runs in the Runs Grid, from where they can be selectively loaded into the trend by the user.

Save Browser Config: Save Run Browser configuration to the display. Check Auto Run Filter to use these settings on load. Make sure to also save the Trend.

Save Config to Database: Opens window where the current configuration can be saved with a name, description, and PARCsecurity owner.

Load Config from Database: Load a saved Run Browser configuration.

Enable Current Mode: Selecting this option will include any current, unfinished run (if available) in run search. As new runs occur, the older runs will be removed from the run set. This option is only available when the Run Filter tab is used.

Apply To All Trends: If Run Browser is launched from a multi-trend, this will cause the run browser filter to affect all trends in the window.

Run Mode:

Consecutive: Runs will be shown consecutively on the trend. See Consecutive Run Mode.

Compare: Runs will be overlaid in the trend. See Compare Run Mode.

Batch: Optimize Run Browser to show batch data, including phase highlighting. See Batch Run Mode.

Show Run Dividers: Shows Bold yellow lines between run periods in a consecutive trend, as seen in the Consecutive runs example.

Use Multi Process: In Compare or Batch mode, if using tags from multiple process areas, attempt to look up information for other process areas.

Location: Move the Runs Grid to the Left or Bottom.