--- title: "View Tag Limits and Cpk" slug: "view-tag-limits-and-cpk" updated: 2024-02-06T11:14:48Z published: 2024-02-06T11:14:48Z canonical: "kb.dataparc.com/view-tag-limits-and-cpk" --- > ## Documentation Index > Fetch the complete documentation index at: https://kb.dataparc.com/llms.txt > Use this file to discover all available pages before exploring further. # View Tag Limits and Cpk **Purpose:** View [Tag Limits](/v1/docs/tag-limits) in a Histogram chart and observe C pk calculations. **Task:** Create a Histogram chart of a tag that has non-grade-based Control-type limits configured. Once open, enable the **Not Grade Based** limits and notice the C pk calculations in the legend. **Steps:** Create a Histogram chart of a tag that has non-grade-based Control-type limits configured. Check **Show/Hide Limits**. ![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image012_027.jpg) In the **Grade** selector, choose **Not Grade Based** and leave the **Limit Type** as **Control.** ![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image014_021.jpg) Click the **Plot** button and the tag’s limits will show on the Histogram as vertical lines. The green line is the target and the red lines are the upper and lower limits. Notice at the bottom of the legend **C pkH** and **C pkL** are calculated. ![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image016_020.jpg)