--- title: "Steam" slug: "steam" updated: 2024-02-02T11:37:43Z published: 2024-02-02T11:37:43Z canonical: "kb.dataparc.com/steam" --- > ## Documentation Index > Fetch the complete documentation index at: https://kb.dataparc.com/llms.txt > Use this file to discover all available pages before exploring further. # Steam The steam functions return certain properties of steam or liquid water given the values of other properties. A steam function does not need a base UTag, as numbers can be manually entered or referenced in the formulas. Alternatively, steam functions can accept UTags as the source of property values. ![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image056_003.jpg) Select the desired **Output** type and its units. The options available in the units menu change based on the output type. ![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image058_005.jpg) Select the **Phase**. By default, this is set to **Auto (not saturated)**, which will automatically determine if the water is liquid or steam. If the water is saturated, select **Saturated liquid** or **Saturated vapor** to get properties for that phase only, or **Two-phase** to get the overall properties of the mixture. ![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image060_004.jpg) Fill in the required inputs, which will vary based on the parameters selected. Manually enter a fixed value, or drag in a tag from the Tag Browser to use a tag’s value. ![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image062_004.jpg) The properties that are not required will be grayed out. Click the ![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image020_002.png) button to use a cell reference to a value, tag name, or formula. Click the ![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image063_003.png) button to use the function’s base UTag, if specified. Specify the units of each property. Click **OK**. The function can be viewed in the formula bar.