--- title: "Configuration" slug: "portio-file-copy-configuration" updated: 2024-01-31T14:20:01Z published: 2024-01-31T14:20:01Z canonical: "kb.dataparc.com/portio-file-copy-configuration" --- > ## Documentation Index > Fetch the complete documentation index at: https://kb.dataparc.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuration The config file is located in the PORTIOFileCopy subfolder of the Capstone folder. To change the settings of PortIO File Copy open the file, PortIOFileCopy.exe.config in a text editor. The file should contain the following text: To configure a setting, change the value for the setting following these rules: **sourceNames:** A list of the sources. Separate the list of sources with a “;”. Use “*” to copy all sources. **sourceFolder:** The folder to monitor for PortIO snap and exceptions files. **destFolder:** The path to the historian snap and exceptions files. Should be the folder that matches the folder that is the ‘datapath’ for a source. Normally a network folder. **destSnapFolder:** The folder to copy only the snap files. If snap files need to be copied leave this field empty. Separate multiple paths with “;”. **SnapBufferInterval:** The frequency in ms to check for new files. **SnapInterval:** The frequency in ms to copy only snap files. This frequency overrides SnapBufferInterval. **HourlyDailyInterval:** The frequency in ms to check for new hourly or daily aggregate files. **Sourcehistpath:** The folder to monitor for PortIO hourly and daily files. **Desthistpath:** The file path to the historian hourly and daily files. Should be the folder that matches the folder that is the ‘histpath’ for a source. Normally a network folder. **CopyAverageFiles:** Set to true to copy average files. **HourlyUpdateMode:** Set to DAILY to update hourly files once a day after midnight. Any other value will update the hourly files when they change.