--- title: "PortIO Configuration" slug: "portio-configuration" updated: 2024-01-31T13:58:43Z published: 2024-01-31T13:58:43Z canonical: "kb.dataparc.com/portio-configuration" --- > ## Documentation Index > Fetch the complete documentation index at: https://kb.dataparc.com/llms.txt > Use this file to discover all available pages before exploring further. # PortIO Configuration ![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image024_013.jpg) **Type of PortIO:** Select the type of PortIO that needs to be configured. **OPC:** A PortIO that works as an OPCDA Client. This connects to an OPCDA server and collects data from points on the server. **File:** A PortIO that is configured to automatically read the contents of a file and make that data/text string available to parse in the custom code and write to tags. **Serial:** A PortIO that is configured to receive data over a serial connection and make that data/text string available to parse in the custom code and write to tags. **Socket:** A PortIO that is configured to receive data over a socket connection and make that data/text string available to parse in the custom code and write to tags. **Files Written to:** Location that PortIO will write out data files. This is the location that either PortIOFileCopy should look for files to copy to the server or should match the DataPath for a source so PARChistory can read in the exception files and write them to history. **Local PortIO folder:** Path of the local PortIO folder, where logfiles and additional folders may be created. **Configured to Run on:** Last PC the PortIO configuration was saved on, normally the PC the PortIO runs on. **Command Line for Shortcut:** Initial command lines that should be added to FireDeamon when configuring the PortIO to run as a service.