--- title: "Layout" slug: "parcreport-designer-properties-controls-layout" updated: 2024-01-29T10:21:03Z published: 2024-01-29T10:21:03Z canonical: "kb.dataparc.com/parcreport-designer-properties-controls-layout" --- > ## Documentation Index > Fetch the complete documentation index at: https://kb.dataparc.com/llms.txt > Use this file to discover all available pages before exploring further. # Layout ![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image165_001.jpg) **Anchor:** When **Can Grow** or **Can Shrink** is enabled, the anchor is the side of the control that will not change position when the control changes size. **Can Grow:** When generating the report, the section expands if the size of content exceeds the size of the section. **Can Shrink:** When generating the report, the section contracts if the content size of the content is smaller the size of the section. **Force Page Break:** Creates a new page at this point when generating the report. A new page can be created before the control, after the control, and both before and after the control. **Height:** The height of the section. **Keep Together:** The report will try to keep controls in this section on the same page. **Left:** The distance from the left edge of the window to the control. **Margin Bottom:** The size of the margin from the bottom of the control. **Margin Left:** The size of the margin from the left of the control. **Margin Right:** The size of the margin from the right of the control. **Margin Top:** The size of the margin from the right of the control. **Top:** The distance from the top of the window to the control. **Width:** The width of the control.