--- title: "Excel Data Source Set-Up" slug: "excel-data-source-set-up" updated: 2023-10-05T13:32:32Z published: 2023-10-05T13:32:32Z canonical: "kb.dataparc.com/excel-data-source-set-up" --- > ## Documentation Index > Fetch the complete documentation index at: https://kb.dataparc.com/llms.txt > Use this file to discover all available pages before exploring further. # Excel Data Source Set-Up **Excel Data Source Set-Up** **Revision 01** **December 8, 2020** **Capstone Technology** An Excel Data Source can be set-up in PARCview using the following steps. NOTE: These tags will only be on the machine where they were created. 1. Open Tag Browser and select the Source tab![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image-1696512712866.png) 2. Select Excel as source 3. Click ‘Select File’ and locate the Excel spreadsheet and click ‘Open’ (Get File in 5.6.x)![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image-1696512718408.png) 4. Select the Excel Sheet and click ‘Load Selected Sheet’ (In 5.6.x, select the ‘Excel DataStructure tab and then click Load Sheet)![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image-1696512729777.png) 5. Use the ‘Selection’ section to configuration the tag and data cells based on your spreadsheet layout![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image-1696512735919.png) 6. Click ‘Save’ (In 5.6.x, click ‘Set As Default’) 7. Click ‘Load Tags to Tags Tab’ (In 5.6.x, click Get Tags)![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image-1696512742544.png) You can double-click the tag to start a trend or right-click in to see additional options