---
title: "Configure Non-Grade-Based Limits"
slug: "configure-non-grade-based-limits"
updated: 2024-01-29T11:31:08Z
published: 2024-01-29T11:31:08Z
canonical: "kb.dataparc.com/configure-non-grade-based-limits"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://kb.dataparc.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Configure Non-Grade-Based Limits

**Purpose:** Practice configuring non-grade based limits for a tag.

**Task:** Define non-grade-based control-type limits for a tag and view them in a Trend.

**Steps:**

1. There are two main ways to open Tag Limits:
  1. From a Trend, right-click on a tag and choose **Limits -> Configure -> Control**.

![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image002_024.jpg)
  2. Or, go to the **Tools** tab in PARCview Explorer and select **Tag Limits**.

![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image004_044.jpg)
2. If Tag Limits was opened from PARCview, drag a tag into the **Tag** field. If it was opened from a Trend, the tag that was right-clicked will pre-populate.
3. Choose Control as the **Type** of limit (or make sure it is selected).
4. Check **Not Grade Based.**
5. Start typing in the **Lower Limit** field. **Grade** and **Limit Start** should automatically populate. Make sure the grade is “[No-Grade]”.
6. Enter a Target limit and an Upper limit.

![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image006_037.jpg)
7. Click **Save** at the top and close.
8. If Tag Limits was launched from a Trend, tag limits will now be enabled.

![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image008_022.png)