---
title: "Autoload Current Grade Runs"
slug: "autoload-current-grade-runs"
updated: 2024-02-06T13:04:20Z
published: 2024-02-06T13:04:20Z
canonical: "kb.dataparc.com/autoload-current-grade-runs"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://kb.dataparc.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Autoload Current Grade Runs

**Purpose:** Learn to configure a Trend to automatically load runs for the current grade.

**Task:** Configure a Trend’s Run Browser settings to automatically show the last three grade runs of the current grade.

**Steps:**

1. Create a Trend with at least one tag.
2. Right-click the plot area of the Trend and choose **Run Browser**.

![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image017_022.jpg)
3. On the **Run Filter** tab, select **Multiple Runs for Process and Period** as the time period source. The Location / Process Period Type and Filter Runs By sections will appear. Also, the Location and Process fields are pre-populated based on the properties of the first tag in the Trend. If the selected process is grade-based, the Grade Filter section will also appear.

![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image019_023.jpg)
4. Set the **Period Type** to “Grade” to retrieve grade runs.

![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image021_027.jpg)
5. In the **Grade Filter** section, make sure “Current Grade” is selected. This setting will cause the Trend to always load data for the current grade.

![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image023_022.jpg)
6. In the **Filter Runs By** section, choose to filter by “Run Count”, then set the number of runs to “3”.

![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image025_017.jpg)
7. In the **Options** section, check **Auto Run Filter When Display Is Loaded**.

![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image027_019.jpg)
8. Make sure the **Run Mode** is set to “Consecutive”.

![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image029_015.jpg)
9. Click **Load Runs In Trend**.

![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image031_004.png)

![](https://cdn.document360.io/59db2ca4-e512-446a-a143-a7c626447812/Images/Documentation/image032_004.png)
10. Save and close the Trend.
11. Reopen the Trend and see the runs load automatically.